{$cfg_webname}
主页 > 土木工程 > 桥梁工程 >

桥梁施工管理研究

来源:56doc.com  资料编号:5D17155 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9A5D17155
资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用. 帮助
资料介绍

桥梁施工管理研究(论文6800字)
摘要
桥梁施工作为施工的高科技工作,其安全质量控制是贯穿整个施工过程中的基本思想。随着社会的不断进步和发展,传统的质量控制管理模式已经不能适应时代要求,需要应用科学的施工安全管理模式,不断提高安全管理水平,真正把安全管理工作做推动和促进桥梁施工质量的进一步发展。桥梁工程施工现场管理对于工程建设质量而言具有极其重要的影响,甚至关系到施工单位能否生存和得到发展壮大。为进一步加快桥梁工程施工现场管理工作的有效实施,桥梁工程施工单位应当以项目为基础落实好各项具体工作,并且强化桥梁工程项目的综合建设工作,持续提升自身的综合管理能力,从而实现桥梁工程经济效益与社会效益的最大化。
要想加强桥梁施工技术,就必须先加强桥梁施工技术中的真空压浆技术。加强桥梁施工技术中的真空压浆技术的措施是:应在压浆之前,先用真空泵抽吸掉预应力孔道中的空气,使得孔道的真空达到负压的0.08mpa值左右,然后在孔道另一端用压浆泵以一定的压力将搅拌好的水泥浆体压入预应力孔道中,并且产生一定的压力。经过加强后的真空压浆施工技术,可以使得孔道内只会存在极少数的空气,也就是说,水泥浆体中就很难形成气泡,而且,孔道内和压浆泵之间的正负压力差,从而大大的提高了孔道内浆体的饱满和密实度。由于,在这水泥浆中有效的降低了水灰比,添加专用的外加剂,也就可以有效的减少了水泥浆体的离析、析水和干硬收缩,同时还可以有效的提高了水泥浆体的强度。
    关键词:桥梁施工;质量控制;质量管理

Abstract
As the high technology work of the construction, the safety qualitycontrol of bridge construction is the basic idea throughout the wholeconstructionprocess. With the continuous progress and development of ociety, the traditional quality control management mode can not meet the requirements of the times, the application of scientific construction safety management mode, constantly improve the level of safety management, the real safety management work to promote and promote the further development of bridge construction quality. The field management of bridge engineering construction plays an extremely important role in the quality of engineering construction, and even relates to the survival and development of the construction unit. In order to further accelerate the effective implementation of bridge construction site management, the construction unit of bridge engineering should carry out various specific work based on the project, and strengthen the comprehensive construction work of bridge project, continuously improve its comprehensive management ability, so as to maximize the economic benefits and social benefits of bridge engineering. To strengthen the bridge construction technology, we must first strengthen the vacuum grouting technology in the bridge construction technology.Strengthening the bridge construction technology of vacuum grouting technology measures is: should be before grouting, prestressed channel with vacuum pump suction out first in the air, making hole vacuum negative pressure of 0.08 mpa value or so, then at the end of a tunnel grouting pump at a certain pressure to press the water slurry mixture into prestressed channel, and cause a certain pressure.After strengthening of vacuum grouting construction technology, can make the hole will only exist in a handful of air, that is to say, it is difficult to form bubbles in water slurry, and the pore and the positive and negative pressure difference between grouting pump, thus greatly improves the pore full of slurry and compactness.Because, in the slurry effectively reduce the water cement ratio and adding special additives, also can effectively reduce the segregation, drainage and cement paste of dry shrinkage, but also can effectively improve the strength of cement paste.
    Key words: bridge construction; Quality control Quality management
 
目录
摘要    I
Abstract    II
1绪论    1
1.桥梁施工方法概述    1
1.1桥梁基础施工    2
1.2桥梁上部结构的施工    2
2.桥梁工程质量控制的几个具体方面    3
2.1桥梁工程大体积混凝土浇注质量控制要求    3
2.2模板施工    3
2.3桥梁工程中的预应力张拉质量控制    3
2.4卫大体积混混土浇筑质量控制措施    4
2.5加强施工前的准备管理工作    4
3.桥梁施工质量控制管理    5
3.1柱墩砼结构    5
3.2盖梁    5
3.3桥梁伸缩缝和轿车头跳车    5
3.4摩立公共设施室    5
3.5预约使用,有序管理    6
4.桥梁施工质量控制管理    7
4.2 管理的安全控制    7
4.3桥梁施工中安全管理措施    7
4.4加强对施工设备的安全管理与控制    7
5.结束语    9
6.参考文献    10
7.致谢词    11

推荐资料