{$cfg_webname}
主页 > 土木工程 > 交通线路 >

上海市轨道交通10号线二期工程双江路站高架西站区间施工方案

来源:56doc.com  资料编号:5D15066 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9A5D15066
资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用. 帮助
资料介绍

上海市轨道交通10号线二期工程双江路站高架西站区间施工方案(论文19700字)
摘    要
毕业设计所研究项目的工程范围为10号线二期工程双江路站~高架西站区间施工方案,是研究双江路站—高架西站区间的高架主体及附属结构的施工。
对该工程项目的研究是通过工程施工技术人员的专业指导、查阅相似工程的施工的相关资料以及对上海市已修建完成的地铁工程施工案例进行收集,比较各工程的施工方案以及其在工程施工的各个方面的保证措施。总结归纳收集到的资料,并制定相应的施工方案。其施工方案的主要对关于板工程、钢筋工程以及混凝土工程进行方案制定,同时也对工程施工前期策划组织方案、施工进度保障设计方案、工程质量安全保证方案进行了研究。其项目的主要工程涉及的内容是钻孔灌注桩、承台、立柱、盖梁、支座、车站梁、车站结构、砌体、钢结构屋架、防水及附属工程等等。

关键词:市政,工程,桥梁,铁路

The Construction Scheme of Shanghai Metro Line 10 Phase Two Project of ShuangJiang Road Station to Western Elevated Station
Abstract
The research project is the graduation design project of line 10 phase two project of the main construction scheme of ShuangJiang road station to Western Elevated station, construction of elevated elevated station interval of Shuangjiang Road Station - and subsidiary structure.
The research of this project is to collect the relevant information of the engineering construction and the construction of the subway construction in Shanghai, and to compare the construction plan and the guarantee measures. To sum up the collected data, and formulate the corresponding construction plan. The construction scheme is mainly about the plan of the project, the reinforcement engineering and the concrete project. At the same time, it also carries on the research to the engineering construction plan, the construction schedule and the engineering quality and safety. The main engineering project involves bored pile, pile cap, column and the beam, beam, bearing, station station structure, masonry, steel structure, waterproof and ancillary works etc.

Key Words:Municipal, Engineering, Bridge, Railway

目    录
1 工程概况及施工总体目标    5
1.1 工程概况    5
1.1.1 工程范围    5
1.1.2 气象、水文、地质情况    8
1.1.3 施工沿线周边管线情况    9
1.2 工程目标    11
1.2.1 施工总体目标    11
1.2.2 工程工期计划    11
1.2.3 工程质量目标    11
1.2.4 工程安全目标    12
1.2.5 工程文明施工目标    12
1.2.6 工程环境保护目标    12
2 编制依据    13
3 区间桥梁施工方案    15
3.1 钻孔灌注桩施工方案    16
3.1.1 施工工艺    16
3.1.2 施工准备    16
3.1.3 测量放样    17
3.1.4 护筒埋设    17
3.1.4 钻机就位    17
3.1.5 试桩    17
3.1.6 成孔施工    18
3.1.7 第一次清孔、拆杆、移机    18
3.1.8 成孔检测    19
3.1.9 钢筋笼制作    19
3.1.10 钢筋笼安放    19
3.1.11 导管安放及二次清孔    19
3.1.12 水下砼浇筑    19
3.2 承台施工方案    20
3.2.1 基坑挖土施工    21
3.2.2 基坑垫层施工    22
3.2.3 桩顶处理施工    23
3.2.4 承台砼施工    23
3.2.5 基坑回填    23
3.3 墩身施工方案    23
3.3.1 施工工艺    24
3.3.2 测量放线    24
3.3.3 施工缝处理    24
3.3.4 立柱钢筋    24
3.3.5 模版工程    25
3.3.6 墩身砼施工    26
3.3.7 桥墩拆模、养护    27
3.3 附属工程施工    27
3.3.1 支座施工    28
3.3.2 栏板、立柱施工    28
3.3.3 桥面排水施工    28
3.3.4 防雷接地施工    29
3.3.5 伸缩缝施工    29
4 各分项工程质量保证措施    29
4.1 混凝质量保证措施    30
4.2 钢筋质量保证措施    30
4.3 模板、支架质量保证措施    30
4.4 预应力质量保证措施    31
4.5 承台及立柱质量保证措施    31
4.6 桥面系质量保证措施    31
4.8 挂篮悬浇质量保证措施    32
4.9 钢结构质量创优措施    32
5 事故应急预案及快速反应机制    32
5.1 事故应急预案    33
5.1.1 人员安排    33
5.1.2 物资准备    33
5.1.3 事故的处置程序及抢险措施    33
5.1.4 主要专项应急预措施    33
5.2 快速反应机制    34
5.3  事件总结及事后处理    34
结    论    35
参 考 文 献    36
附录A 附录内容名称    37
致    谢    38

推荐资料