远离提示电路的设计(STC89C52单片机)

远离提示电路的设计(STC89C52单片机)(论文11800字)
摘要：针对现在人们生活节奏越来越快，经常因为丢三落四、疏忽大意、被行窃等原因,造成的贵重物品丢失和孩童走失不能即时寻回的问题，本设计采用单片机微控制器对远离提示电路进行智能化改进，利用Android平台的智能手机和蓝牙技术设计一款智能防丟器。该智能防丟器由从机和主机构成,使用蓝牙无线技术连接互相通信，通过检测两者之间的信号强度来实现报警。本设计是采用高性能、低功耗的STC89C52单片机作为控制模块的核心，结合手动按键模块、电源模块、蓝牙无线模块来设计的一种智能防丢器。
关键字：STC89C52单片机;智能防丢器;蓝牙技术
 
Design of Remote Prompting Circuit
Abstrsct:In view of the increasingly rapid pace of life nowadays, the loss of valuables caused by the loss of valuables and the loss of children can not be recovered immediately due to the loss of valuables, negligence, theft and so on, often caused by the loss of people's lives. In this design, the MCU is used to transform the remote prompt circuit intelligently. The smart phone based on Android platform and Bluetooth technology are used to design an intelligent anti-loss device. The intelligent anti-loss device consists of a master and a slave. The slave and the host are connected by bluetooth wireless technology and communicate with each other, the alarm is realized by detecting the signal strength between them. This design uses STC89C52 MCU with high performance and low power consumption as the core of the control module, and combines manual key module, power module and Bluetooth wireless module to design a new intelligent anti-loss device.
Key words: STC89C52MCU;Intelligent Loss-proof Device;Wireless Technology
 

目 录
1绪论    1
1.1课题的背景    1
1.2 国内外研究现状    1
1.3 本文工作内容    2
2设计方案论证    3
2.1本文设计目的    3
2.2本设计的方案论证    3
2.2.1主控器模块选取    3
2.2.2无线收发模块选取    4
2.2.3电源模块的选取    4
3总体方案设计    5
3.1总体设计框图    5
3.2防丢原理    5
3.2.1蓝牙通信原理    5
3.2.2信号强度检测    6
3.3硬件部分    6
3.4软件部分    7
4硬件设计与实现    8
4.1防丢器的设计原理    8
4.2主要单元设计    8
4.2.1单片机最小系统    8
4.2.2无线收发模块电路    9
4.2.3电源模块电路    10
4.2.4按键模块电路    10
4.2.5声光报警模块电路    11
5 程序设计    12
5.1软件简介    12
5.2程序结构分析    12
5.2.1 主机软件设计    12
5.2.2从机软件设计    16
6系统的安装与调试    18
6.1检查元件及焊接    18
6.2主要模块调试    18
6.2.1蓝牙模块调试    18
6.3整体调试    20
结论    22
参考文献    23
致谢    24